Sunday, 25 September 2011
Saturday, 24 September 2011
Friday, 23 September 2011
CFD Modeling of NACA-2415 Airfoil
Supervisor: Mr. Bilal Khan
Project Team: Rub Nawaz Khalid (ME3-2003), M. Farooq Haider (ME3-2006), Bushra Naz (ME3-2012), Adnan Mehmood (ME3-2014)
Project Team: Rub Nawaz Khalid (ME3-2003), M. Farooq Haider (ME3-2006), Bushra Naz (ME3-2012), Adnan Mehmood (ME3-2014)
Introduction
The Aerodynamic field offers excellent career opportunities for anyone who is related to Mechanical field and has the necessary educational background including extensive training the project on “Airfoil modeling and simulation” covers the modeling (Gambit) details, simulation procedure, measuring the coefficients and finding the lift, drag and moment on different Mach no and different Angle of Attacks.
Main Description
This is basically a theoretical project on CFD Software. The project has following three main phases,- Pre-processing which includes geometry creation and mashing by using GAMBIT software.
- Solving by using FLUENT as solver we determined the required parameters like lift, drag and moments.
- Post processing includes the interpretation of the results and comparison with reference results.
Block Diagram
Alternate Fuel for Diesel Engine
Supervisor: Ms. Muazama Arshad
Project Team: Sohaib Ashraf, Abdul Rehman, Rashid Mehmood, Tanveer ur Rehman
Project Team: Sohaib Ashraf, Abdul Rehman, Rashid Mehmood, Tanveer ur Rehman
The New Generation Energy
Biodiesel has been gaining prominence in recent years. Clean and renewable, biodiesel has been touted as the answer to the issue of diminishing energy reserves.Introduction
This project involves the study and investigation of waste vegetable oil as an alternative fuel for diesel engines. Edible oils, which are used for several times and become unsuitable for further human use, will be used to make a cheaper fuel. In addition, the performance of engine should not be compromised.Description
Due to overwhelming prices of fossil fuel, there is a need to find an alternate source of energy for our machines. Keeping this in view, we have taken biodegradable fuel as an alternative for fossils fuel in future and compared its different characteristics with ordinary diesel including engine efficiencies as well.Block Diagram
Conclusion
- Non-toxic and biodegradable
- Increases life of engine
- Burns cleaner
- Safer than petroleum fuels
- Utilizes waste products
- Reduces waste products
- Reduces harmful pollutants emitted into the air
- Reduces economic losses to our agricultural industry
Wednesday, 21 September 2011
Tuesday, 20 September 2011
Saturday, 17 September 2011
Friday, 16 September 2011
Thursday, 15 September 2011
Wednesday, 14 September 2011
Free Mechanical Engineering Software
All the software listed in this section is Windows based.
CAD Software
CAD/CAM Software
Computational Fluid Dynamics
Finite Element Analysis Software
Dynamic Simulation Software
Thermal Analysis Software
Utility Programs
Assorted software
their is variety of softwares which a mechanical engineer can use to draw the any machine part and also analyse that part of the machines under several conditions...
Like in Pro Engineer software we can draw any 3D part drawing of any machine...
Similarly in Ansys software we can draw and also analyse the part.
CAD Software
CAD/CAM Software
Computational Fluid Dynamics
Finite Element Analysis Software
Dynamic Simulation Software
Thermal Analysis Software
Utility Programs
Assorted software
their is variety of softwares which a mechanical engineer can use to draw the any machine part and also analyse that part of the machines under several conditions...
Like in Pro Engineer software we can draw any 3D part drawing of any machine...
Similarly in Ansys software we can draw and also analyse the part.
 |
| Pro Engineer for drawing the 3D parts |
 |
| Ansys used for Analysis |
Green Sand Molds
Casting metal is a simple process - you melt the metal, pour it in a mold, and let it harden. But the mold has to withstand the heat and pressure of the metal while holding it's shape. It's not as simple as it looks.
Making the mold.
For no particular reason, I decided to cast a small wedge and some ingots. Here I've filled and rammed the drag, and sprinkled it with diatomaceous earth as a parting compound
Making the mold.
For no particular reason, I decided to cast a small wedge and some ingots. Here I've filled and rammed the drag, and sprinkled it with diatomaceous earth as a parting compound
CFD Modeling of NACA-2415 Airfoil
Supervisor: Mr. Bilal Khan
Project Team: Rub Nawaz Khalid (ME3-2003), M. Farooq Haider (ME3-2006), Bushra Naz (ME3-2012), Adnan Mehmood (ME3-2014)
Project Team: Rub Nawaz Khalid (ME3-2003), M. Farooq Haider (ME3-2006), Bushra Naz (ME3-2012), Adnan Mehmood (ME3-2014)
Introduction
The Aerodynamic field offers excellent career opportunities for anyone who is related to Mechanical field and has the necessary educational background including extensive training the project on “Airfoil modeling and simulation” covers the modeling (Gambit) details, simulation procedure, measuring the coefficients and finding the lift, drag and moment on different Mach no and different Angle of Attacks.Main Description
This is basically a theoretical project on CFD Software. The project has following three main phases,- Pre-processing which includes geometry creation and mashing by using GAMBIT software.
- Solving by using FLUENT as solver we determined the required parameters like lift, drag and moments.
- Post processing includes the interpretation of the results and comparison with reference results.
Block Diagram
Alternate Fuel for Diesel Engine
Supervisor: Ms. Muazama Arshad
Project Team: Sohaib Ashraf, Abdul Rehman, Rashid Mehmood, Tanveer ur Rehman
Project Team: Sohaib Ashraf, Abdul Rehman, Rashid Mehmood, Tanveer ur Rehman
The New Generation Energy
Biodiesel has been gaining prominence in recent years. Clean and renewable, biodiesel has been touted as the answer to the issue of diminishing energy reserves.Introduction
This project involves the study and investigation of waste vegetable oil as an alternative fuel for diesel engines. Edible oils, which are used for several times and become unsuitable for further human use, will be used to make a cheaper fuel. In addition, the performance of engine should not be compromised.Description
Due to overwhelming prices of fossil fuel, there is a need to find an alternate source of energy for our machines. Keeping this in view, we have taken biodegradable fuel as an alternative for fossils fuel in future and compared its different characteristics with ordinary diesel including engine efficiencies as well.Block Diagram
Conclusion
- Non-toxic and biodegradable
- Increases life of engine
- Burns cleaner
- Safer than petroleum fuels
- Utilizes waste products
- Reduces waste products
- Reduces harmful pollutants emitted into the air
- Reduces economic losses to our agricultural industry
Design & Conversion of Gasoline Vehicle to CNG Electric Hybrid Vehicle
Supervisor: Col (R).Hamid Nawaz
Project Team: Jalal Zafar, Shahzad Saleem, Abid Imtiaz, Abu Sufyan
Project Team: Jalal Zafar, Shahzad Saleem, Abid Imtiaz, Abu Sufyan
Objective
We intend to evaluate minimal travelling cost by designing and fabricating a CNG Electric Hybrid Vehicle. The vision behind this project is to cut the increasing fuel cost and Green house effect.
Main Description
The project is divided to attain two main objectives,- Design and Fabrication of Electrical Hybrid Vehicle
- Performance evaluation
Series Hybrid
Parallel Hybrid
Wah Engineering College Projects Exhibition 2010
Introduction
At Wah Engineering College we believe in synergistic collaboration with the industry for achieving academic excellence. Our students develop a design & build project at the end of their studies in which they demonstrate their engineering skills to cater the industry needs. This year’s projects in discipline of Mechatronics, Mechanical and Electrical Engineering were displayed in an exhibition at WEC Hall on Thursday 26th August 2010.This exhibition provided an excellent opportunity to industry managers for talent hunt as well as to look for new ideas for their products. So a job fair was also arranged at the venue of the exhibition.
Floor Plan of Exhibition Hall
List of Projects
| Mechatronics Engineering Projects | |||||
 | Robotic Hand for Disabled Persons Using EMG Signals | ||||
 | Fuel-Less Electricity Generation | ||||
 | Energy Management Unit for Alternate Energy | ||||
 | Computerization of Flow Wrap Machine | ||||
| Electrical Engineering Projects | |||||
 | Car Safety Assistant | ||||
 | Design of Analog I/O Interface with Signal Conditioning Features and Monitoring Device Using PLC | ||||
 | Video Camera Based Corner Shot Gun | ||||
 | Real Time Data Acquisition and Signal Processing of Brain Signals | ||||
 | Robotic Arm Control Using EEG | ||||
 | Remote Design a Device to Measure a Muzzle Velocity | ||||
 | DC Drive Trainer for Single Quadrant Operation | ||||
 | Telemetry Artillery Shell Projectile Trajectory | ||||
| Mechanical Engineering Projects | |||||
 | CFD Modeling of Airflow Over NACA Aero-File | ||||
 | Manufacturing and Analysis of Alternate Fuel for Diesel Engine | ||||
 | Designing & Fabrication of Working Model of the Sun, Earth Moon Rotation | ||||
 | Design & Conversion of Gasoline Vehicle to CNG Electric Hybrid Vehicle and Undertake its Performance | ||||
 | Shell and Spiral Coil Heat Exchange | ||||
 | Implementation of Six Sigma Techniques for Enhancement of Productivity in POF Production Shop | ||||
 | Designing and Fabrication of Solar Space Heating | ||||
 | Design and Construction of Quad Rotor Flying Object | ||||
 | Design and Construction of Remote Control Recon Ground Vehicle | ||||
 | Implementation of JIT in Manufacturing Industry KSB Pumps | ||||
 | Design and Analysis of Heat Exchanger for Waste Heat Recovery System in a Power Plant | ||||
 | Fabrication of Solar Air-Conditioning Using Vapor Absorption Refrigeration Cycle | ||||
 | Modal Analysis of a Composite Cantilever Beam | ||||
Subscribe to:
Posts (Atom)